If you are new with using a metal detector, there are many things you need to maintain and follow to get a better experience during work.
Metal detector work is a hobby passion, but for beginners, it's way far from that. Beginners are awaiting their first job to do. Their curious mind always searches about a new horizon of things hide upon the earth's crust.
Just imagine when you search and get a plank of old things, How it would touch you?
But now, this is hard for you to significant findings. If you are beginners, then you have to search a lot. After you understand all the primary use of the metal detector, you will be able to do any task related to your device.
In this post, you will address some tips and tricks that are highly applicable, especially when you are a beginner. If you recurrently follow the tips during detection, it will be helpful for you to a significant finding.
Before Start- What should you look after.
1. Choose an affordable metal detector.
If you're beginners, it's not wise to pick a pro-level detector first. You have to choose not only affordable but also a sustainable and suitable one. In the beginning, choose your detector under your expanse.
2. Choose a definite site.
While preparing your device, you must need a perfect place where you can start your search. Pick a perfected destination near you. You can also start searching in your backyard too.
3. Pick a perfect spot
You'll see a lot of space against the site. Picking a perfect spot will cause you more advantages to findings.
4. Works Early in the day
Detecting things may cause you a broad time when you're a beginner. So the wise pick, if you can start searching at the starting of the day.
5. Take proper gear.
When you are working, you will need some essential gear to ease your job. Gloves, headphones, cap, Etc. Must be along with you. Otherwise, you will be in trouble.
6. Bring extra parts.
If you're beginners, you may not know how can be parts be spoilt during work. To avoid unexpected occurrences, you have to tweaks with your extra parts.
7. Check the detectors.
Before preparing the device, a quick-start guide of detectors conclusively enriches your experience. So, check the powerline, alert sound, and others.
8. Double-check it.
When you start findings before, you need to recheck it. To transform the better result of searching, your device needs to super-steady.
Due time: Digging Procedure Spot Setup
9. Don't leave any space
You don't know where the precious thing is lying on the surface. A pro-level detectorist won't leave any single corner or spot. So, you also need to follow these ruled during work.
10. Too many search too much results.
The more you search, the more you get. When you invest a definite period of time, you are expecting some return. These tips will succeed in your effortless work.
11. Search in corner
You can get lots of hidden treasures from the tricky spot of a site like a corner or sloppy surface. You have to well-skilled enough to hunt these spots.
12. Search the lower portion of land.
The land that lies on the lower portion is suitable for hidden metals. You need to locate these spots and keep searching.
Precautional Guide During The Work
13. Carry a sack to keep metal safe.
Whenever you go for a hunt, you may need a sack to keep the things for safety. If you don't carry it, your routine can be unnatural to you.
14. Work near a water source
When you work on a wetland, you must need frequent water to wash the things that you get. Otherwise, you will struggle to make decent things. But if you work on dry space, it's not important at all.
15. Work after raining.
Metal detectors work on the electromagnetic wave when after raining, these will work simultaneously because the water helps to pass electric waves into it.
16. Avoid Stormy weather.
Safety must be needed when you are working. The stormy and windy weather can cause you an adverse effect during work. To avoid natural calamities, you should avoid the stormy day. If you work, underwater safety precaution is also compulsory. If you are a beginner, you shouldn't hunt underwater.
Special tips for Specific Circumstances-
17. Relic hunting.
Relic hunting can be addictive in any case. You can find a historical treasure to a golden bunch of parts. Every nation has its own historical and unforgettable things hidden in their community. So if you are interested in relic hunting, keep your mind sharp and prepared to invest a decent time to achieve a sustainable goal.
When you supposed to do relic hunting, you have to follow all these given tips and tricks. Because if you left any space, there might be a chance of not getting valuable substances into the spot. So dig every part and corner of the spot and find your treasure.
when you are detecting metal aside from the beach, some precautions should be strictly followed. But the fact is that Beach hunting is more adventurous and more accessible than others.
There are many possibilities to get jewelry things. If you choose a crowded sea beach, then it's a 90% possibility of getting a chance of things. But these some sea beaches aren't allowed metal detectors.
You should keep in mind to have a good metal detector for detecting gold.
Show The Gentle Behavior With The Owner
19. Respect owner
When at work, respect the property owner. The place you work can be a federal government, personal or something else. You should always maintain a frequent positive manner.
20. Don't be the reasons of annoyance
If you feel you are the reason for annoyance. You must need to take aside from there. Don't' make noise. This is one of the annoying reasons. You should do your work silently.
21. Don't be hazardous for properties.
During work, you may face some problem and need to overcome. But there's need some action that can be dangerous for owners. In the current case, you need to talk with them. Otherwise, don't do it without permission.
Must-Follow Beginner Tips During Your Task
22. Don't make a mess
If you are beginners, these are a common problem to do messing. You should maintain a routine and make sure to follow as you can. When you trying follow hidden treasure to reveal, you will recover your fault by constant repeatation.
23. Don't repeat in one spot of site
Most of the beginners aren't mark the spot that he already explores. So there's a high possibility of searching the same spot repeatedly. It will cost you valuable time.
24. Use a small coil in a trashy site.
The trashy spot is much challenging to find substance. In that case, you can choose a small coil metal detectors. It will help you done the job correctly into the trashy place.
25. Fill up the place after doing the job.
After doing a tremendous job, you don't want to spoil it. Don't compromise the grade of work while you finished. After each work, you must fill up the place where you work with your detector.
26. Remove trash from your sack.
Usually, trash can bind with your main findings. So try to clean your final findings. If you fascinating, attractive one, you must keep aside this from general findings. You will get higher value from that.
27. Finalize your practical work.
After doing all these steps, you will see the correction of your job. So, gather your equipment and prepare for your next tour.
When you follow these steps in every circumstance to use a metal detector, we'll guarantee you an outstanding moment that you already face. So I think these exclusive tips and tricks will compatible with your all sorts detectorist job.
If you are a beginner, you must consider these tips for your first adventure. After you did several jobs, you will arrange your routine conceding to your time and interest.
Can you hunt Coin by a metal detector?
Yes, Coin is metal. An entry-level to professional, all detectors can detect Coin. So if you are a user of metal detectors, then you can hunt Coin. Besides other metal, you'll be able to find copper, silver, or even gold. But you need a high-quality metal detector for gold detection.
Can metal detectors detect copper wire?
The metal detector works depend on electric-magnetic frequency. The copper is highly conductive. So when a metal detector makes a wave, the magnetic field of the copper will respond. And you will get the alert. But in some cases, if the copper wire is too thick, it may be quite impossible to detect. But commonly, you can detect copper wire with your metal detector.