How to split wood with an electric log splitter? How it works?

Log splitting is a simple job to do in daily life. If you are new with a log splitter, you need to learn the basic techniques for your splitting job. When you have an electric log splitter, you have to know the proper way to operate.

Why you select an electric log splitter?

You have to understand the way to serve your techniques during the work with your splitter. Nowadays, there are many splitting devices available in the market. Within these machines, an electric splitter can be the top choice to ease your log splitting task.

Proper use of a log splitter is crucial. If you follow the appropriate instruction during log splitting, you won't face any problem at all. Otherwise, the wrong procedure can be hazardous for you.

Here we'll explain why you have to know the proper way to split your log. We will also explain the step by step guide and must follow instruction during splitting.

How did it work?

The mechanism of splitting wood for every splitter is almost the same. However, powered or manual both are work with the external pressure, which derives from either manforce or machine.

Do you know what lever is? What the function of it?

How does hydraulics work?

Hydraulics is the thing that consumes the energy but gives it more. When it provides pressure, it accelerates the machine. If you use a hydraulic splitter, you have to operate the directional valve to maintain your work's fluid.

The fluid pump work with from cap to bottom. At that time, the shaft works simultaneously. By using both mechanisms, the hydraulics can pressure up and able take more weight.

Why do you prefer electric splitter?

There's much reason behind choosing an electric splitter. First of all, If you use it daily, the time you need will be reduced. It would help if you had less workforce.

You don't need the body strength directly. But the working system requires the less workforce during the job. Otherwise, it can't happen.

Safety is one of the most common considerations during work. Most of the time, if accidents happen, the reason for that is manual splitter ( Because of slipping from the hand). Even electric splitters cause accidents if there's a lack of maintaining safety precautions.

An electric log splitter gives you less expense but a good outcome. You need to connect the power and set it up.

However, using a splitter depends on how you operate and how you understand the device. If you are used to with, it can be fun. But if you are the beginner of a splitting job, you must follow the steps and guide, giving you much relevant user experience.

How to split wood ( A Step by step consideration )

1. Firstly, Find A Safe place to work.

Wherever you work, make sure the place is safe and suitable for working. Check if there's an obstacle that can hamper your task. You can select a location far from the reach of children.

It will be better if there's enough space to work and suitable to handle the logs after each splitting. But don't split beside your house. If you can break backyard of your home, it will be ideal for splitting jobs and safe use.

Because if splitting wedges push more pressure to split the log, it will be dangerous for the operation to control the situation. An uncertain accident can happen. That's why a safe place is so much important for the log splitting job.

You can select the backyard, an open field, or beside the log storehouse. It would help if you had less effort to split and less strain to gather the splitting wood and store it again.

2. Clip it up the device with the soil level.

When you find the pick place for the device. Then you have to take consider the flat soil level. The essential thing of splitting is to settle it horizontally, and in these circumstances, you have to choose a flat space

—Otherwise, the center of mass tackles down its way, and that situation horrible for the job. If you don't expect those incidents, you must pick a flat place for the device.

3. Collect the log and keep away from the splitter.

After finding a cramped and flat spot, your next task is to gather the log into a definite place that must be settled down a little far from the splitter. Don't ever forget the sorting of the same size logs. 

You may collect several sizes log. However, the dimensions, you need to sort the log of similar size. When you begin the work, it feels you easy to pick the log and chopping. Most of the time, the bigger piece of wood is hard to spit. In that case, you can start with the smaller one.

4. Check the device and all essential parts.

Before starting the device, you must check all the parts needed to keep maintaining its smooth function. Some features are susceptible, and some are very useful during the job.

Check the power supply carefully to prevent short circuits. If you forget these check-up, you may face the problem at work.

5. Start calibration.

A device must need the external source of power for its operation. You have to look back at your machine. However, using a log cutter, the log you want to chop may be too hard to split.

Thus you need to customize your device according to the log you chop. Some woods need high pressure to crack, and some need less stress. The tension comes from the hydraulics pumps.

6. Check if there any awkward sound.

An unnatural sound can be the reason for the problem of your device. It may be derived from the hydraulics, piston, device didn't align with the surface or loosening of mounting bolts, Etc. Sometimes a new machine can be problematic if there's lacking setting of the exact parts incorrect position.

When you found any strange sound, check the parts discussing above, and decide how to overcome them. But don't work with these tricular sound. It can cause further accidents.

7. Now, Take a log.

There are several types of log available for splitting. It would help if you made a decision about which wood is suitable for your fireplace. Then you can choose your logs according to the requirements. Softwood or hardwood both are usable for fire-burning.

Suppose you use hardwood, it's relatively harder to chopping than the softwood for some beginners. But who those are used to with the device can easily split both kinds of wood.

8. Tricks of Huge diameter wood.

If you have a plank of wood of enormous diameter, you need to consider some tricks to crack it. Because the device's general usage will fail to split the large diameter logs, it needs more pressure to break, but the pressure is limited for each splitters..

In that case, you can split from the border side of the logs. After finishing the one side part, then go to the next side as usual. Split it continuously until the size is permissible to your splitter reach. In this way, you can split a vast diameter of a log easily.

9. Start splitting.

While using the device, use your left hand to operate the hydraulics controller. This way, you can feel the easy way to accomplish the job. On the other hand, you can use your right hand to maintaining the push button. Thus this way, you can push the hydraulic pressure as your logs need to crack.

If you push maximum, but the wood isn't split, that means the log is too hard to break. In that case, you can start work from the marginal or border side of the wood.

If you face the log jammed with the wedge, then make a little height with a small log and try to pull back from the wedge,

VIDEO : How to split wood with an electric log splitter?

10. Turn the device off.

Don't waste energy. When you finish your job, turn off the device and be start to collect the splitting log. Take this log to the store-room or where you want to keep it.

11. Clean the subjected area.

Always clean the area of the splitting spot for further use.

Is there any problem to operate the device?

When you're using an electric device, you have to extra sure about the machine for your job. Otherwise, the electrical problem will fall you in trouble.

Always remember the splitter's capability. If you force extra, then it won't be suitable for both devices and you. If the wedge doesn't cut the limbs, you need to sharpen the edge or change it.

Vibration or shaking can be derived from the low oil level on your hydraulic system. It would help if you refilled it, and you will get your smooth operation.

Conclusion:

During the use of an electric log splitter, You see there's always a problem with the hydraulics part and the correct wedge position. You need to solve the problem so that the next work will be easy for you. A log splitter did the job quickly better than the manual way.

So without thinking, you can choose an electric log splitter for you to a daily log splitting job.